Skip to content

After-care: watering in and keeping sprays dry

Many lawn jobs need something to happen straight afterwards. Granules and top dressing need watering in. Liquid feeds and sprays need the leaves to stay dry. Some treatments need a break from mowing. Groundsman handles this when you mark the job done.

  • Water it in: run the job’s zones as soon as you press Done. Guided plan steps set this by depth, such as “water in 6 mm”. Groundsman turns that into minutes for each zone from its watering rate (mm/h), so a sprinkler zone and a drip zone get different times.
  • Hold scheduled watering: the job’s zones skip their scheduled runs for a set number of hours, so a spray isn’t washed off. Run history records these as skipped for a treatment hold.
  • No mowing: some plan steps say not to mow for a time before or after. If you mark a mow done during that time, Groundsman asks first, and the job list on Garden shows a warning.
  • Temperature limit: some steps say “not above” a temperature. It shows in the job’s guide.
  1. On Garden, press Edit on the job.
  2. Under After-care when marked done, set:
    • Water in for so many min per zone;
    • Hold scheduled watering for so many hours.
  3. Press Save.

Jobs from guided lawn plans come with their after-care already set from the pack calendar.

  1. Groundsman tells you what it will do, for example “This will water in 6 mm now (12/25 min per zone) and skip scheduled watering on them for 24h”.
  2. Confirm, and the watering starts.
  3. If the job uses tracked products, it asks How much did you use? first. See my products.

The open job on the Today checklist shows the same steps under Afterwards, so you know before you start.

Groundsman · smart watering and lawn care for Adelaide homes ·hello@groundsman.au