How to measure your garden with a tape measure
Measure everything from fixed points that won’t move: boundary corners, fence lines and the corners of the house. For each thing you want to place, take two measurements from a known corner or edge, and write them down as you go. Two people and a 30 m tape make it quick.
Why measure when you have a satellite photo?
Section titled “Why measure when you have a satellite photo?”Aerial photos are good for the big picture but miss detail on the ground:
- trees and shade sails hide beds, heads and paths;
- eaves and verandas overhang what’s under them;
- the image may be slightly stretched or taken at an angle;
- sprinkler heads and drip lines are too small to see.
A few tape measurements fix all of this. They matter most for sprinklers, where half a metre decides whether a head reaches its neighbour.
Pick your reference points
Section titled “Pick your reference points”Choose two or three points that are easy to find on the photo and on the ground:
- a boundary corner (look for the fence post);
- a corner of the house or shed;
- a straight fence or the edge of the driveway.
Walls and fences give you straight edges to measure from at right angles.
Two ways to fix a point
Section titled “Two ways to fix a point”From a corner
Section titled “From a corner”Measure out from each of the two edges that meet at the corner. For a sprinkler near the back corner: 2.4 m out from the back fence and 1.1 m out from the side fence. Keep the tape square to each edge.
From an edge
Section titled “From an edge”Measure straight in from the edge, then along it from one end. For a rose: 1.5 m in from the side fence, 6.2 m along it from the back corner.
Tips for accurate measuring
Section titled “Tips for accurate measuring”- Hook the tape on the fence post or have someone hold the zero end.
- Keep the tape level and tight; a sagging tape reads long.
- Measure to the centre of a sprinkler head or a tree trunk.
- Sketch the garden on paper and write each measurement on it.
- Measure along curved bed edges in short straight lines, corner by corner.
With Groundsman
Section titled “With Groundsman”Groundsman’s Place by distance lets you type your tape measurements straight onto the Zones map.
- Set the map’s scale first, from your block’s official boundary, the land size, edge lengths or a measured line. See how to set up your property map.
- Start placing something: a zone’s corners (Draw on map), a row of drip tube, a new sprinkler head, a selected head you want to move, or a plant.
- Tap 📏 By distance.
- Click a corner or an edge on the map, of your boundary or any zone.
- From a corner, type the distance out from each of its two edges. From an edge, type the distance in from it and along it from either end.
- Groundsman places the point there. Tap Pick another to measure from a different corner or edge.
You can mix clicks and measurements. Click roughly for the easy bits and measure the ones that matter, such as sprinkler heads and the corners of a lawn.
Related
Section titled “Related”Groundsman · smart watering and lawn care for Adelaide homes ·hello@groundsman.au
