Skip to content

Water use

Groundsman counts the water each zone uses, so you can see where your garden’s water goes and what your programs will use next. It works in litres, not dollars.

On Home, scroll to the Water used card. In Simple view it’s under Show more.

  • This week and Last 30 days: litres used.
  • Next 7 days and Next 30 days: projected litres, from your programs as they’re set, before rain, skips or the soil balance’s day-to-day calls.
  • A bar for each of the last 30 days. Hover over a bar for that day’s litres.
  • A table by zone: litres this week and over 30 days, and its flow in litres a minute.
  • Chart opens the run history chart for the whole property.
  • Monthly report opens the monthly water report.
  • Measured: zones on a timer with a flow meter (the Holman WX1 has one; the WX2 and WX4 have one per outlet) record each run’s actual litres.
  • Estimated: other zones are worked out from the run time, the zone’s area and its watering rate. Estimates show with ~. A catch-cup test makes the watering rate, and the estimate, more accurate.

If a zone has no flow meter and no area yet, it shows minutes instead of litres and isn’t counted in the projection. Set its area on the Zones tab to see litres. (1 mm of water on 1 m² is 1 litre.)

On the Watering tab, each program in the list shows about how much it uses a week. It’s a quick way to see which program uses the most.

  1. Check Needs you on Home, or the Right amount? card under Health check > Open on the Watering tab. It shows zones getting more than they need this month, with Cut to to fix it. See Right amount?.
  2. Turn on rain skipping. See Rain and weather.
  3. Lower Seasonal adjust in autumn and winter. See Seasonal adjust and rain delay.

Groundsman · smart watering and lawn care for Adelaide homes ·hello@groundsman.au