Skip to content

Zone settings

Each timer outlet is a zone, and each zone has settings that shape its watering and care. Groundsman uses them for cycle and soak, the Right amount? check, mowing heights, product quantities and more.

A zone’s setup questions, one at a time

A zone's setup questions, one at a time.

Most of a zone’s settings come from a few setup questions, asked one at a time. The rest sit on the zone’s card.

On the Zones tab, under Timers, there’s a card for each zone. Click a zone to open it, or press Expand all. A folded zone shows a one-line summary, such as “Lawn · Buffalo · 120 m² · Front tap · Sprinkler”. If some of its questions are still unanswered, it says how many, for example “2 questions to answer”.

Zones with unanswered questions also show under Needs you on Home, as “Finish setting up” and the zone’s name, with an Answer button. With more than two zones to finish, it’s one line with a Start button that takes them a zone at a time. See the Home tab.

  1. On the zone’s card, press Answer setup questions (or Edit answers once they’re done).
  2. The questions open one at a time, beside the page on a wide screen or as a sheet from the bottom of a phone. The top shows where you are, such as “Question 1 of 6”.
  3. Pick an answer to move on, or type it and press Next. Back goes to the question before.
  4. Optional questions have Skip (Skip and finish on the last one) for anything you can’t answer yet. You can come back to it later.
  5. Press Finish on the last question to save your answers.

You only see the questions that fit the zone. A garden bed isn’t asked about grass, and only a zone on drippers is asked how many it has.

  1. What it waters: Lawn, or Garden beds, hedges or pots.
  2. Which grass it is (lawns only; optional): Couch, Buffalo, Kikuyu or Zoysia (warm-season), Tall fescue, Ryegrass or Bentgrass (cool-season), or A mix, or not sure. The grass sets mowing heights and how thirsty the lawn is.
  3. Whether it’s oversown with ryegrass for winter (lawns only): No, Yes, annual ryegrass each autumn, Yes, perennial ryegrass or Something else.
  4. How it’s watered: Sprinklers (pop-ups or rotors), Micro-sprays (small sprays on stakes or risers in beds), Drippers or Weeper or soaker hose.
  5. How many drippers, and how much each gives (drippers only; optional): the number of Drippers, and what Each gives in L/h. Garden drippers usually give 2, 4 or 8 litres an hour, and it’s often printed on them. A timer with a flow meter learns the zone’s flow by itself, so you can skip this one.
  6. How big the area is (sprinklers and micro-sprays only; optional): the Area in m². Leave it blank if you’ll draw the zone on the map, and the area is worked out from the drawing.
  7. Which tap it’s on (optional): a name you’ll recognise, such as “Front tap” or “Back tap”. Zones on the same tap matter for running together.

If you change an answer so another no longer fits, Groundsman drops the old one. A zone changed to a garden bed loses its grass, and a zone changed to drippers or weeper hose loses its mm/h.

The card itself keeps:

  • Name: type a name you’ll recognise, such as “Front lawn” or “Roses bed”.
  • Its colour, which marks the zone on the map.
  • m²: the zone’s area. Type it in, or leave it blank and it comes from the map once the scale is set (“from map”).
  • mm/h: how many millimetres of water it puts down an hour. Drip zones don’t have this box (see below).
  • Soil sensor: if you have one, pick it and set the moisture % to skip watering at. See soil sensors.
  • Its sprinkler heads, if you’ve turned them on. See sprinkler heads.
  • Draw on map for the zone’s shape. See draw zones.

Changes save as you make them, and Undo takes any of them back.

If you leave mm/h blank, Groundsman uses a typical figure for how the zone is watered:

Watered by Typical mm/h
Sprinkler 10
Micro-spray 15

If you list the zone’s sprinkler heads, the rate is worked out from them. A catch-cup test measures it for real, and wins over both.

Zones on drippers or weeper hose water plants rather than an area, so they have no mm/h and no catch-cup test. Their litres come from what their flow meter has measured, or else from the number of drippers times each one’s flow.

Groundsman · smart watering and lawn care for Adelaide homes ·hello@groundsman.au