How to skip watering when it rains (and how much rain counts)
Skip a lawn watering when about 5 mm or more of rain has fallen in the last day or is clearly on the way. A light shower of 1 or 2 mm mostly evaporates or wets the leaves, so it doesn’t replace a watering, especially in summer.
How much rain is enough
Section titled “How much rain is enough”A summer watering for an established lawn puts down about 10 mm. Rain counts towards that only if it soaks in:
- Under 2 mm: barely reaches the soil. Water as usual.
- 2 to 5 mm: helps, but in summer it’s gone in a day. Consider a shorter run.
- 5 to 10 mm: skip the next watering.
- Over 10 mm: skip and check again in a few days. In winter, this can see the garden through a week or more.
Measure it. A rain gauge in an open spot, away from trees and eaves, tells you what fell in your garden. Bureau of Meteorology figures for the nearest station can be several millimetres off, because Adelaide showers are patchy: the hills and the coast often get quite different falls.
Look ahead too
Section titled “Look ahead too”Watering at 6am and then getting 15 mm of rain at 10am wastes the water, and on clay it can leave the lawn waterlogged. If a good fall is forecast with high confidence for later today or tomorrow, it’s often worth waiting. Forecasts aren’t perfect, so in a heatwave don’t skip on a forecast alone.
Check the soil
Section titled “Check the soil”Rain is only a guide, so check the soil. After rain, push a screwdriver into the lawn. If it slides in to 100 mm or more without effort, skip. On sandy coastal soil that has gone water-repellent, rain can run off or sit in beads, so the soil underneath may still be dry.
A weather station in your garden measures what actually fell, which beats a forecast for your suburb. A soil moisture sensor goes one better and measures the soil itself.
With Groundsman
Section titled “With Groundsman”Groundsman checks rain before every scheduled run, using Open-Meteo forecasts (no account needed) or your own weather station.
- Go to Settings and find Rain.
- Choose how rain changes watering:
- “Rain delay: skip runs after rain” skips a scheduled run when enough rain counts;
- “Scale back by the rain” also cuts runs short by the rain that fell, and skips them when it’s enough;
- “Off: rain doesn’t change watering”.
- Set Rain that counts. Groundsman adds the last 24 hours’ rain to half of the next 24 hours’ forecast, and skips at 5 mm unless you change it.
- If you have a Holman Helios or Zephyr or another Tuya weather station, set Rain from to My weather station.
- On the Home tab, check the Rain figures under Watering controls. Refresh fetches the latest.
Skipped runs show in Recent runs and Run history with the reason, and the Monthly report shows roughly how much water rain skips saved.
To pause for a few days after a big storm, press Rain delay on the Home tab and pick 1, 2 or 3 days or a week. Manual runs still work while it’s paused.
For skips based on the soil itself, add a soil sensor to the zone.
Related
Section titled “Related”Groundsman · smart watering and lawn care for Adelaide homes ·hello@groundsman.au
