Skip to content

How to draw your garden watering zones

A watering zone is everything one tap timer outlet waters at once. To map your zones, run each one, see where it wets, and outline that area. Getting the outline right matters because the zone’s area sets how much water it needs and how much product its lawn takes.

Plants that need the same water should share a zone. Irrigation designers call this hydrozoning, and it’s the easiest way to save water.

  • Lawns and garden beds apart. Lawn needs frequent, even watering in summer; established shrubs need deep, occasional soaks.
  • Sun and shade apart. A north-facing front lawn in Adelaide can need twice the water of a shaded side strip.
  • One kind of emitter per zone. Sprays, rotary nozzles, rotors and drippers all put water down at different rates. Mixed together, part of the zone is always over or under watered.
  • Natives and succulents on their own, or off the system once established.

If your existing zones mix these up, mapping them is the first step to fixing them.

  1. Run one zone on its own and walk around it.
  2. Note where the water reaches, not only where the heads are. A sprinkler throws several metres past its own spot.
  3. Mark the corners with pegs or note them against fixed points such as fences, paths and the house.
  4. Repeat for each zone.

A zone can cover more than one area: a front strip and a side strip on the same pipe, for example.

  1. Set up the property map first (a photo and its scale). Areas can’t be worked out until the scale is set.
  2. On the Zones tab, find the zone under Timers and tap Draw on map.
  3. Click around the edge of the area it waters, corner by corner. Undo point removes the last click. Tap Finish shape when you’re done.
  4. For a zone that waters two separate areas, tap Add shape and draw the second one. A zone can have as many shapes as you like.
  5. To delete a shape, click it on the map and tap Delete this shape. Clear shape removes all of a zone’s shapes.
  6. Press Answer setup questions (or Edit answers) on each zone’s card to say what it waters (Lawn or Garden beds, hedges or pots), the grass, how it’s watered (Sprinklers, Micro-sprays, Drippers or Weeper or soaker hose) and which tap it’s on.
  7. The area (m²) now comes from the map. If you’d typed sizes earlier, Groundsman offers Update to these sizes or Keep what I entered.

Use 📏 By distance for precise corners: click a corner or edge of the boundary or another zone, then type tape-measured distances from it.

Lawn and bed areas also show under At a glance on Home, and every watering amount, product quantity and mixing instruction uses them.

Groundsman · smart watering and lawn care for Adelaide homes ·hello@groundsman.au