Skip to content

Water a zone now

You can water any zone by hand at any time, on top of your programs. Manual runs always water for the minutes you pick: seasonal adjust, rain delay, rain settings and soil sensors don’t change them.

  1. Open Home and scroll to the Zones card.
  2. Find the zone, for example “Front lawn”.
  3. Tap 10m, 20m or 30m.

The zone lights up on the map, and the top of Home shows it watering with the minutes left. If Running together doesn’t allow it to run alongside something already watering, it waits its turn.

Tap Test 1 min on a zone and go and look at it. It’s the quickest way to check a timer, tap and sprinklers are working after a change or a repair.

  • To stop one zone, tap Stop on it in the Zones card.
  • To stop everything, tap Stop all at the top of Home.

Test timers (at the top of the Zones card) opens a page listing every timer outlet, with its battery and a countdown while it runs. For each outlet:

  • On runs it for up to 60 minutes;
  • 1 min, 2 min or 5 min, or type any number of minutes and run it;
  • Turn off stops it.

Use it when you’re out in the garden checking each tap in turn. Back to the app returns you to Groundsman.

Tap Actions, then under Water a zone now choose the zone and 5 to 60 minutes, and tap Start. You can also Run a program now. See Simple view.

With a Groundsman cloud account, the My garden page has 10m, 20m and 30m for each zone, Stop, and Run now for each program. See Remote control.

  • Every manual run shows in the run history with what started it. See Run history.
  • Each timer gets its own countdown, so it turns off at the end even if the controller stops.
  • If new plants need an extra drink in hot weather, a manual run on their zone does it. See How to water new plants.

Groundsman · smart watering and lawn care for Adelaide homes ·hello@groundsman.au