How to cut your water bill by watering the garden smarter
In an Adelaide summer, garden watering can be the largest part of a household’s water use. The biggest savings come from watering to what the garden actually needs, skipping after rain, fixing leaks and uneven sprinklers, and watering early. None of these means a brown lawn.
Where the water goes
Section titled “Where the water goes”1 mm of water over 1 m² is 1 litre. A 100 m² lawn watered with 10 mm three times a week uses about 3,000 litres a week, and that’s a sensible summer amount. Problems start when a timer is set once in January and left alone:
- in April it’s putting down twice what the lawn needs;
- after 20 mm of rain it waters anyway;
- a broken sprinkler or split pipe runs for weeks unnoticed;
- a patchy zone gets a longer run to green the dry spot, overwatering the rest.
Ten ways to use less
Section titled “Ten ways to use less”- Match the season. An established lawn needs about a fifth as much water in June as in January. Turn it down every month or two, or use a method that adjusts itself.
- Skip after rain. About 5 mm or more of rain covers a summer watering.
- Water deeply and less often. Deep roots need less water, and less is lost from the surface.
- Water early. Before about 9am there’s less wind and evaporation. SA Water suggests watering before 9am or after 6pm.
- Fix uneven zones first. A catch-cup test finds dry spots. Fix the heads instead of watering longer.
- Stop runoff. Split long runs on clay into rounds.
- Move beds to drip. Drip puts water at the roots, with nothing lost to overspray.
- Mulch beds 50 to 75 mm deep.
- Mow higher in summer. Longer grass shades the soil.
- Catch leaks early. A dripping timer or broken fitting can waste thousands of litres before you notice.
Read your meter
Section titled “Read your meter”Your SA Water bill arrives every three months, which is too slow to spot a problem. Read your water meter (usually near the front boundary) at the same time on two days, with nothing running. Any change overnight means a leak somewhere. Read it again before and after a watering to see what one program uses.
With Groundsman
Section titled “With Groundsman”Groundsman shows your garden’s water in litres, so you can see what each zone and program uses and where to save.
- On the Watering tab, press Open on the Health check line and check Right amount?. It compares each zone’s week with this month’s need (from Adelaide’s evaporation and rain, your grass or bed and your soil) and offers Cut to where you’re overwatering. That fix also shows under Needs you on the Home tab.
- In Settings, set Rain to skip or scale back runs after rain, and turn on “Adjust run times to the weather” under Weather so mild days get shorter runs.
- Consider a Soil water balance program, which waters only when the soil needs it.
- On the Home tab, look at Water used and its Chart. Each program on the Watering tab shows about how much it uses a week.
- Open the Monthly report to compare each month with the month before and the same month last year, and to see roughly how much rain and wet-soil skips saved.
- Keep Flow alerts on (in Settings). With a flow meter, a burst pipe or broken sprinkler pauses that zone’s scheduled watering, and a timer leaking while shut is flagged.
Groundsman doesn’t show dollars. To turn litres into a cost, use the water use price on your SA Water bill.
Related
Section titled “Related”Groundsman · smart watering and lawn care for Adelaide homes ·hello@groundsman.au
