Set up a Groundsman kit yourself
A Groundsman kit comes ready for your home. The Groundsman Hub and the timer hub are set up for your Wi-Fi before they’re sent, and the timers are already paired to the hub. You fit the timers, plug in the hubs and set up your garden in the app. Most homes take an hour or two, most of it drawing the map.
Before you start
Section titled “Before you start”- Wi-Fi details: Groundsman sets the kit up for your home network before sending it, so let Groundsman know if your Wi-Fi name or password changes before it arrives.
- Your Wi-Fi reaches the garden side of the house. The Groundsman Hub and timer hub sit indoors, near a power point, where your Wi-Fi is good.
- The taps are in range. Holman timer hubs reach up to about 50 m in the open; walls, sheds and water tanks cut that down. Put the timer hub near a window on the side of the house with most taps.
- Batteries for each tap timer (see the timer’s box for the type).
1. Fit the timers
Section titled “1. Fit the timers”- Turn each tap off and screw a timer onto it, hand-tight. If the thread doesn’t match, a tap adaptor from the hardware store sorts it.
- Put the batteries in.
- Connect the hose, sprinkler line or drip line to the timer’s outlet.
- Turn the tap fully on. The timer does the switching from now on.
Note which tap each timer is on. You’ll name the zones to match in the app.
2. Plug in the hubs
Section titled “2. Plug in the hubs”- Plug in the timer hub.
- Plug in the Groundsman Hub. Give both about a minute to start and join your Wi-Fi.
3. Open the app
Section titled “3. Open the app”- On your phone, connect to your home Wi-Fi.
- Open the browser and go to the address Groundsman gave you with your kit.
- If it doesn’t open, check both hubs have power and wait another minute. See troubleshooting if it still won’t load.
- Add the page to your home screen so it opens like an app.
4. Check every timer
Section titled “4. Check every timer”- On Home, press Test timers next to Zones.
- Run each outlet for 1 minute and watch that the right sprinklers come on.
- Check each timer shows a battery level.
If one doesn’t answer, move the timer hub closer to it, or check its batteries. See test your sprinkler zones.
5. Set up your garden
Section titled “5. Set up your garden”- Map: on the Zones tab, paste a satellite screenshot of your house, then outline your block. In South Australia, Find your block fits the boundary and scale from your address. See map photo and boundary.
- Zones: draw each zone’s shape and answer its setup questions: what it waters, its grass and how it’s watered. See draw zones and zone settings.
- Running together: on the Watering tab, press Open on the Health check line, then choose whether zones can run at the same time. It’s also in Settings. See running together.
- First program: press + New program, pick a method and the zones, and check the suggested days and times. See set up a watering schedule.
- Rain: in Settings, choose what rain does. See rain and weather.
6. Add the Groundsman cloud (optional)
Section titled “6. Add the Groundsman cloud (optional)”For remote control, alert emails and a monthly water report:
- Sign up at app.groundsman.au.
- Email hello@groundsman.au to have your controller linked to your account. There’s no code to type in.
- Once linked, My garden shows your garden. See Groundsman cloud account.
The cloud is also what lets you add more timers yourself later.
Related
Section titled “Related”Groundsman · smart watering and lawn care for Adelaide homes ·hello@groundsman.au
