Skip to content

Sprinkler heads

Groundsman can keep a list of the sprinkler heads in each zone. From the makers’ charts it works out the zone’s watering rate, checks the flow meter against what the heads should use, and warns you about mixed heads. You can then place them on the map to see the coverage.

The feature is off by default.

  1. Open Settings.
  2. Under Watering, find Sprinklers and tick List each zone’s sprinkler heads.

Each zone’s settings on the Zones tab now have a Sprinklers section.

  1. On the Zones tab, open the zone under Timers.
  2. Under Sprinklers, either:
    • press Choose by photo to browse pictures. Filter by brand or by type (Sprays, Rotary nozzles, Rotors, Bubblers, or Drip, soaker and micro), and search by colour or markings on the nozzle; or
    • pick from Brand…, then Model…, then Pattern… (the arc and throw).
  3. Type how many there are and press Add.
  4. Repeat for each kind of head in the zone.

Makers include Hunter, Rain Bird, Toro, K-Rain, Pope, Holman, Netafim, Antelco and others. Each pick shows its throw, flow and rate, with a link to the maker’s chart.

If a head isn’t listed, choose Not listed: enter my own from the brand list and type its name, litres a minute, rate if known, and how many.

You can also set the body each nozzle sits on, from the Body list under it.

  • The zone’s rate: shown as mm/h above the list. A catch-cup test result wins over it.
  • The flow check: “Together they should use about” so many L/min, against what the meter measured last run. If they’re more than a quarter apart, it suggests checking for a leak, a blocked or missing nozzle, or low pressure.
  • Mixed heads: sprays and rotary nozzles put water down at very different rates. If a zone mixes them, it warns you to keep them on separate zones.
  • Change the count in the box next to a head.
  • Change swaps it for another nozzle, keeping the count and where they are on the map.
  • ✕ removes it.

Groundsman · smart watering and lawn care for Adelaide homes ·hello@groundsman.au