What to do when a watering zone didn't water
When a zone doesn’t water, the cause is usually one of four things: the run was skipped on purpose (rain, wet soil or a pause), the timer couldn’t be reached, the tap was off, or the controller was off at the start time. Check which it was before you change anything, because the fix is different for each.
Was it skipped on purpose?
Section titled “Was it skipped on purpose?”A smart system often skips a run for a good reason, and that can look like a fault.
- Rain: after decent rain, runs are skipped or scaled back. In an Adelaide winter that can mean no watering for weeks, which is normal.
- Wet soil: a soil moisture sensor can skip a zone that’s still moist.
- Paused: a rain delay or holiday pause stops all scheduled programs.
- After a treatment: watering can be held for some hours after a spray so it isn’t washed off.
- The program is off, or the zone isn’t in any program.
Is the timer working?
Section titled “Is the timer working?”Battery tap timers are the usual weak point.
- Flat batteries: the most common cause. Replace them at the start of each spring before the hot weather, not when they die mid-January.
- No connection: a Wi-Fi timer talks to its timer hub. If the hub is unplugged, off the Wi-Fi or too far away, the timer can’t be told to start.
- Manual off switch: some timers have a button or dial that overrides the app.
Is water getting through?
Section titled “Is water getting through?”The timer may have opened with nothing coming out.
- The garden tap is turned off (it happens after someone uses the hose).
- The timer’s inlet filter is blocked with grit.
- A hose has come off at the timer or is kinked under a pot.
Was the controller on?
Section titled “Was the controller on?”If the power was off or the controller was restarting at the start time, the run can be missed. Each timer still gets its own countdown, so a run that started will finish safely, but one that never started won’t happen until the next scheduled time.
With Groundsman
Section titled “With Groundsman”Groundsman records every run and every skip, and tells you when something went wrong.
- Look at the top of the Home tab. Alerts show there, with a count on the Home tab:
- Didn’t water: the timer wouldn’t open. The hub or timer didn’t answer, or the battery is flat.
- Missed watering: the controller was off or offline at a start time.
- Watering cut short: the controller restarted during the run.
- No water came out: the timer opened but its flow meter counted nothing, so check the tap and hose.
- Tap History on the alert or the zone. It lists skipped runs with the reason (rain, wet soil, treatment hold or paused), so you can see if it was a deliberate skip.
- If it says Hold till on the zone in Home, watering is being held after a treatment. Tap it to clear the hold if you need to.
- Check the timer: replace batteries, make sure the timer hub is plugged in and on the Wi-Fi, and check the tap is on.
- Open Test timers (under Zones on Home) and run that outlet for 1 minute while you watch the tap.
- If the garden needs it, water the zone now with a 10, 20 or 30 minute run from Home.
- Tap I’ve checked it: clear on the alert.
If several zones missed at once, the controller or a timer hub is the likely cause. Settings > This controller has Restart Groundsman (about 15 seconds) if the app seems stuck.
Related
Section titled “Related”Groundsman · smart watering and lawn care for Adelaide homes ·hello@groundsman.au
