Skip to content

Place sprinkler heads on the map

Once a zone’s sprinkler heads are listed, you can put them on the map. Groundsman draws each head’s throw and arc to scale, shows dry spots as red dots, and can suggest better nozzles, arcs and throws.

  • Turn on List each zone’s sprinkler heads in Settings and add the zone’s heads.
  • Draw the zone’s shape on the map. See draw zones.
  • Set the map’s scale. See map scale.
  1. On the Zones tab, open the zone under Timers.
  2. Next to a head in its Sprinklers list, press Place on map.
  3. Click the map where each head is. Each one faces into the zone to start with.
  4. Press Done. The button now reads On map and how many.

To place a head from tape measurements, press 📏 By distance. See place by distance.

Click a head on the map to select it, then:

  • drag the head to move it;
  • drag the yellow grip to turn it;
  • drag a white grip to change its arc (for adjustable nozzles);
  • drag the blue grip at the tip to shorten its throw, as the radius screw does.

The buttons above the map do the same in small steps: ⟲ Turn, Turn ⟳, − Arc and Arc +. You can also switch that one head to a different pattern, Remove it, or press Done.

Each placed head is numbered. A table under the zone lists each one’s nozzle, arc, which way it Faces, its Radius screw setting and flow, so you can match it to what’s in the ground.

Under the list, Groundsman sums up the zone:

  • how much water the driest quarter gets against the average (even, fair or uneven);
  • how much gets under half (the red dots);
  • how much lands on no lawn or bed, or on the zones next door.

It’s an estimate from the makers’ figures. A catch-cup test shows the real thing. Use Layers to show or hide Sprinklers and Dry spots.

  1. Press Suggest better settings. It tries other nozzles, arcs, directions and throws for each head where it is.
  2. Read the before and after figures and the numbered changes.
  3. Press Show on map to see it, or Show current to compare.
  4. For more, press Try moving heads too. It tries moving up to 3 heads, which can take half a minute. Pick Move none, Move 1 and so on to compare.
  5. Press Use these to apply, or Dismiss.

Use these can be undone with Undo.

Groundsman · smart watering and lawn care for Adelaide homes ·hello@groundsman.au