How to map your sprinklers
To map your sprinklers, run each zone, find and identify every head, then mark where each one sits and which way it faces. A sprinkler map shows the gaps where lawn goes dry, the heads that soak the path, and what you have when a nozzle needs replacing. It takes an hour or so for a typical suburban block.
Find every head
Section titled “Find every head”Run one zone at a time and walk it. Heads hide in long grass, under mulch and behind shrubs, and a buried head is often the reason for a dry patch.
- Mark each head with a flag, a peg or a dab of flour as you find it.
- Note which zone it belongs to. Two zones can have heads side by side.
- Sketch the layout or take photos from a known spot, such as the back door.
Identify the type
Section titled “Identify the type”There are four common kinds on Adelaide lawns and beds:
- Pop-up sprays: a fixed fan of water. Typical throw 2 to 5 m. They put water down fast, which can run off clay.
- Rotary nozzles: several rotating streams on a spray body. Slower rate, longer throw, less drift.
- Rotors: a single stream that turns back and forth, for larger lawns.
- Micro-sprays and drippers: in garden beds, usually on 13 mm poly or drip tube.
Most nozzles have their make and pattern printed or moulded on top, and many makers use a coloured cap or insert for the throw. Write down what you see; a letter such as Q, H or F often means quarter, half or full circle.
Note the pattern and direction
Section titled “Note the pattern and direction”For each head, record:
- the arc (a quarter in a corner, a half along an edge, a full circle in the middle);
- the way it faces;
- how far it throws (pace it out with the water on);
- whether the spray reaches the next head. Good coverage means each head throws to its neighbours (head-to-head).
With Groundsman
Section titled “With Groundsman”Groundsman puts your heads on your property map to scale and works out how evenly each zone waters.
- Set up the property map first: a photo, the boundary and the scale. See how to set up your property map.
- In Settings > Sprinklers, turn on “List each zone’s sprinkler heads”.
- On the Zones tab, open a zone under Timers. Under Sprinklers, tap Choose by photo to find each nozzle by picture. Filter by brand or type, or search by its colour or markings. Or pick the brand, model and pattern from the lists.
- Add how many of that nozzle the zone has, then tap Place on map and click where each head is. It faces into the zone.
- Click a placed head to adjust it: drag it to move it, the yellow grip to turn it, the white grips to set its arc and the blue grip to shorten its throw.
- Read the coverage under the zone: how the driest quarter compares with the average, how much gets under half (red dots on the map) and how much water lands off the lawn or bed.
- Tap Suggest better settings for nozzles, arcs and throws that water more evenly, and Try moving heads too to see if moving up to three heads helps. Use these applies them, and can be undone.
Groundsman also works out the zone’s watering rate from its heads and compares it with the flow meter, so run times are based on your real system. A catch-cup test, if you do one, takes priority.
To place heads precisely, use 📏 By distance and type measurements from a corner or fence. Layers shows or hides sprinklers and dry spots, and ⛶ Full screen gives you room to work.
Related
Section titled “Related”Groundsman · smart watering and lawn care for Adelaide homes ·hello@groundsman.au
