Skip to content

How to fertilise your lawn in Adelaide

Feed a warm-season Adelaide lawn while it’s growing: from September or October through to April, with a slow-release granular fertiliser every 8 to 10 weeks. Water each feed in straight away, and give a pre-winter feed in April so the lawn holds its colour into the cold months. Don’t feed a dormant lawn in mid-winter; it can’t use it.

Couch, buffalo and kikuyu grow when the soil is warm. In Adelaide that means:

Month What to do
September to October First feed once the lawn is greening up and growing.
November to February A slow-release feed every 8 to 10 weeks. Skip a feed in a heatwave.
March to April A pre-winter feed to carry the lawn into the cool months.
May to August Nothing for dormant warm-season lawns. Oversown ryegrass may want a light feed.

Cool-season lawns such as tall fescue are the other way round: feed mainly in autumn and spring, and go easy in summer.

  • Slow-release granular is the backbone of most plans. It feeds for weeks, so there are fewer peaks of growth and less mowing. Look for one made for lawns, with nitrogen as the main nutrient.
  • Liquid fertiliser gives quick colour and is handy between granular feeds or before an event. It works through the leaves, so it needs to stay dry for a while afterwards.
  • Organic feeds (pelletised manures, kelp) are gentler and improve the soil, but work more slowly.

Weeds can tell you a lot. Clover, capeweed, oxalis and flatweed thrive where the lawn is short of nitrogen. If they’re spreading, keep up the feeds.

  1. Measure the area. Rates are given per square metre or per 100 m², so work out how much the whole lawn needs before you start.
  2. Spread evenly. Use a spreader if you can. Split the amount in half and spread one half up and down, the other across, so you don’t get stripes of dark and pale grass.
  3. Avoid hot days. Don’t feed when it’s over about 30°C or the lawn is stressed and dry.
  4. Water it in. About 10 mm moves the granules off the leaves and into the soil. Granules left sitting on wet leaves in the sun can scorch.
  5. Sweep paths and driveways. Fertiliser washed into the gutter feeds the creek, not your lawn.

Always follow the label rate and safety directions. More is not better: overfeeding means soft, fast growth, more mowing and more thatch.

  1. Answer each lawn’s setup questions on the Zones tab (under Timers), including its grass and area, so quantities are worked out for your lawn. See zone settings.
  2. On the Garden tab, pick a plan under Guided plans. The feeds come from the supplier’s pack calendar, with rates per 100 m² and the amount for your lawn. Or add your own with Add a job > Granular fertiliser, which starts at every 8 weeks over the growing season.
  3. When a feed is due it appears on the Today checklist. Tap it, then How to mix and apply for the amount and how to spread it. See how to mix and apply.
  4. Tap Done. Groundsman runs the watering-in on the job’s zones. Where the plan gives a depth (say 10 mm), the minutes are worked out from each zone’s watering rate. See after-care.
  5. Answer How much did you use? so My products keeps count.

For a liquid feed, the job holds scheduled watering instead, so it isn’t washed off before it’s absorbed.

Groundsman · smart watering and lawn care for Adelaide homes ·hello@groundsman.au