Skip to content

How to see how much water your garden uses

You can measure garden water three ways: read your water meter before and after a watering, work it out from each zone’s area and how many millimetres it puts down, or fit tap timers with flow meters that count every litre. The first is free, the second is a good estimate, and the third tells you exactly, zone by zone.

Your SA Water meter is usually in a box near the front boundary.

  1. Make sure nothing else is using water (no washing machine, dishwasher or shower).
  2. Write down the reading.
  3. Run one zone for a set time, say 10 minutes.
  4. Read it again. The difference is that zone’s use for 10 minutes.

Multiply up to get a whole watering, then a week. Repeat for each zone. It’s fiddly, but it’s accurate, and it’s a good way to find out which zone uses the most.

1 mm of water over 1 m² is 1 litre. If a lawn zone covers 80 m² and puts down 10 mm each watering:

80 m² × 10 mm = 800 litres a watering, or 2,400 litres a week at three waterings.

You need the zone’s area (pace it out or measure it on a map) and how many mm it puts down per watering (from a catch-cup test). It’s an estimate, and it misses leaks.

A flow meter in the tap timer counts the litres that go through each outlet. It’s exact, records every run, and catches leaks and blockages that the other methods can’t.

As a rough guide in an Adelaide summer:

  • an established lawn: 25 to 30 litres per m² a week;
  • shrubs and roses on drip: much less, often a quarter of the lawn’s per m²;
  • established natives: very little once settled.

If one zone uses far more than you’d expect from its size, check for a broken head, a split pipe or a run time that was set for a heatwave and never turned back.

Groundsman keeps a litre count for every run. Holman WX1 timers have a flow meter, and WX2 and WX4 timers have one per outlet. Zones without a meter are estimated from their area and watering rate.

  1. On the Home tab, open Water used. Press Chart to see litres (or minutes) by day for the last 7, 30, 90 or 120 days, for one zone, the whole property, all lawns or all garden beds. Measured bars are solid; estimated ones are striped.
  2. Check Projected water use for the next 7 and 30 days from your current programs.
  3. On the Watering tab, each program shows about how much it uses a week.
  4. Open Monthly report for a month’s litres by zone, against the month before and the same month last year, with runs skipped and roughly the water that saved.
  5. Under each zone on the Home tab, History lists every run with when, how long, what started it and the litres.

For better estimates on zones without a meter, give each zone its area (in its setup questions, or draw it on the map) and do a catch-cup test on sprinkler zones. For drip zones, give the number of drippers and how much each gives. If you have the Groundsman cloud, a monthly water report email arrives at the start of each month.

Groundsman · smart watering and lawn care for Adelaide homes ·hello@groundsman.au