Flow meters and leak alerts
Some tap timers have a flow meter that counts the water going through. Groundsman reads it after each run, so you know each zone’s real water use, and it learns what’s normal so it can spot a burst pipe or a leak.
Which timers have one
Section titled “Which timers have one”- Holman WX1: one flow meter.
- Holman WX2 and WX4: a meter for each outlet.
Zones without a meter have their water estimated from the run time, the zone’s area and its watering rate. See Water use.
Flow alerts
Section titled “Flow alerts”Flow alerts are on by default. Each zone needs 3 normal runs of 2 minutes or more first, so Groundsman can learn its usual litres a minute. After that it checks every run:
| What it sees | Likely cause | What happens |
|---|---|---|
| More water than usual (half as much again, or more) | A burst pipe, a broken or missing sprinkler, a split hose | Alert, and that zone’s scheduled watering pauses until you clear it |
| Water while switched off | A leak at the tap, timer seal or pipe | Alert, and the zone pauses too |
| Less water than usual (half or less) | A tap not fully on, a blocked filter, a kinked hose | Alert only |
| No water came out | The tap is off, or the hose is off or blocked | Alert only |
Alerts show at the top of Home. A paused zone shows “Flow alert: paused” in the Zones card. With a Groundsman cloud account, each new alert is also emailed to you.
When you get one
Section titled “When you get one”- Read the alert. It says what was measured and what’s usual, for example the litres a minute.
- Go and look at the zone. Tap Test 1 min on Home and watch it run. Manual runs still work while a zone is paused.
- Fix what you find, or call your installer or a plumber.
- Tap I’ve checked it: clear. Scheduled watering on that zone starts again.
Turn flow alerts off
Section titled “Turn flow alerts off”Settings > Watering > Flow alerts: untick Check each run’s flow. Litres are still measured. It’s worth leaving on: a burst pipe can waste a lot of water before anyone notices.
- After changing sprinklers or nozzles, a zone’s flow changes, so expect an alert. Clear it once you’ve checked. The usual figure comes from the zone’s last 5 runs, so it catches up after a few runs.
- The monthly water report lists the month’s flow alerts by zone.
Related
Section titled “Related”Groundsman · smart watering and lawn care for Adelaide homes ·hello@groundsman.au
