How to set up a map of your property
A useful garden map needs three things: a photo of the property from above, the block’s boundary and the right scale. With those, the area of every lawn and bed can be measured from the map, which is what watering amounts and product quantities depend on. A satellite screenshot is enough to start.
Why the size matters
Section titled “Why the size matters”Lawn food, pre-emergent and wetting agent are all applied per square metre, and watering is measured in millimetres over an area. Guess the lawn at 100 m² when it’s really 70 m² and you buy and spread about 40% more than you need. A to-scale map gets the areas right for every zone and bed.
Get a good photo
Section titled “Get a good photo”- Use the satellite view in Google Maps, or the aerial photo on a real estate listing.
- Zoom in until your block fills most of the screen, with a bit of the neighbours showing.
- Take a screenshot. Pick a recent image without heavy shadow if you can.
Satellite photos aren’t perfect. Trees hide garden beds, eaves overhang paths, and the image can be slightly stretched. That’s fine for planning; you can fine-tune with a tape measure later.
Find your block size
Section titled “Find your block size”You can set the scale from any of these:
- The official boundary: in South Australia, the state’s public land parcel data has each block’s legal boundary and area.
- The land size: from the listing, your council rates notice or the title.
- Edge lengths: the frontage and one side are plenty.
- A known line: measure something you can see on the photo, such as the house or a fence, with a tape.
With Groundsman
Section titled “With Groundsman”- On the Zones tab, go to Map image and paste your screenshot (Ctrl+V), drop the file or choose a file.
- In Block size, type your address and tap Find (South Australia only). Pick your address from the matches. Groundsman shows your block’s official outline and area.
- Tap Place it on my photo, then click corner A and corner B on your photo, matching the yellow corners on the outline. The exact boundary is drawn and the scale set.
- If it doesn’t quite line up, tap adjust the boundary: drag the corners, drag a + to add a corner and double-click one to remove it. The scale is re-fitted to your block’s official area.
- Outside SA, or if you’d rather, tap Draw boundary and click each corner of your block. Then under Or enter the size yourself, type the Land size and tap Use land size, or enter edge lengths and tap Use edge lengths. Measure a line lets you set the scale from anything you’ve measured.
- Tick Crop to trim the photo to your block. Neighbours are greyed out either way.
- If you’d already typed zone sizes, Groundsman offers Update to these sizes or Keep what I entered when the scale changes.
Once the map is set, draw your zones, place your sprinklers and add your plants on it. Layers shows or hides each of these, and ⛶ Full screen makes the map fill the screen.
Related
Section titled “Related”Groundsman · smart watering and lawn care for Adelaide homes ·hello@groundsman.au
