Skip to content

Remote control

With a Groundsman cloud account, you can control watering from anywhere on the My garden page. The buttons work while your controller shows connected.

On your controller’s card in My garden:

  • Stop everything: stops all watering now.
  • Rain delay: pause programs for 1d, 2d, 3d or 1 wk. While paused, the card says “Paused until” and the date, with Resume.
  • Water a zone: tap 10m, 20m or 30m next to a zone, or Stop while it’s running.
  • Run a program: the Programs table lists each program’s name and start times (“· off” if it’s switched off). Tap Run now.

For anything else, tap Open the full app to use the whole app through the cloud. See My garden portal.

  1. Log in at app.groundsman.au.
  2. Check the card shows connected.
  3. Tap 20m next to “Back lawn” (for example).
  4. Wait for the message, then refresh to see it watering.
Message What happened
“Done: …” The controller did it.
“Sent: … The controller hasn’t confirmed yet; refresh in a moment.” It’s on its way. Refresh to check.
“The controller couldn’t do that: …” The controller got it but couldn’t do it, with the reason.
“Your controller isn’t connected right now, so nothing was sent.” Nothing happened. Watering carries on as scheduled.
“That’s a lot of commands. Wait a minute and try again.” More than 30 commands in a minute.

A command the controller doesn’t run within 60 seconds is dropped, so nothing runs late or by surprise.

When the controller isn’t connected, the card says “Remote control works while the controller is connected.”

  • The controller only accepts a short list of allowed commands.
  • It keeps one outgoing connection to the cloud open, and has no open ports at home.
  • Each remote action is recorded in the Activity log on the app’s Home tab.
  • The app’s footer at home says “remote control on” when it’s live.
  • Rain delay from the cloud is the same as rain delay at home. See Seasonal adjust and rain delay.

Groundsman · smart watering and lawn care for Adelaide homes ·hello@groundsman.au