Skip to content

Running together

A tap only has so much pressure. Run too many zones off it at once and every sprinkler sputters. Running together tells Groundsman which zones may water at the same time.

  • On the Watering tab: press Open on the Health check line. Running together is in the panel that opens.
  • Settings > Watering > Running together.
Rule What it means
One at a time Only one zone runs at a time, anywhere on the property.
One per tap Zones on the same tap take turns. Zones on different taps can run together. This is the default.
One lawn at a time Never two lawns together, but a garden bed (drippers, weepers) can run alongside a lawn. Beds on the same tap take turns.
  1. Open the Watering tab and press Open on the Health check line.
  2. Under Running together, tap the rule you want.
  3. Check the This week chart to see the result.

One per tap works from each zone’s tap name:

  1. Open the Zones tab and find the zone under Timers.
  2. In Tap, type a name, for example “Front tap” or “Back tap”.
  3. Give zones on the same tap the same name.

The outlets of one 2- or 4-outlet timer (Holman WX2 or WX4) share one tap, so they take turns unless you give them different tap names.

Each program has Let zones run side by side when the rule allows in its editor.

  • On: zones in that program can run at the same time where your rule allows, so the program finishes sooner.
  • Off: the program’s zones run one after another.

If a zone you start by hand can’t run alongside what’s already watering, it waits its turn.

  • If you’re not sure, leave it on One per tap.
  • If sprinklers look weak when two zones run, choose One at a time.
  • Drippers use little water, so One lawn at a time lets beds water while a lawn does.

Groundsman · smart watering and lawn care for Adelaide homes ·hello@groundsman.au