Skip to content

How to set up smart garden watering yourself

Smart watering at home is mostly planning: which parts of the garden need different water, which taps feed them, and where a hub can reach them all. The hardware is battery tap timers that screw onto your taps, so there’s no digging or wiring for most gardens. Groundsman comes as a kit you set up yourself, or an installer can do it.

Walk the garden with a notepad and list each area that needs its own watering:

  • Lawns, front and back separately if one gets far more sun.
  • Garden beds, split into drip beds and spray beds.
  • Pots, veggies and new plantings, which need water most often in summer.

Then note which tap feeds each area today. Each timer outlet becomes one zone. A two- or four-outlet timer gives one tap several zones, but they take turns, because they share the tap’s flow.

Check your sprinklers before you automate them

Section titled “Check your sprinklers before you automate them”

A timer runs whatever’s on the end of it, so fix the basics first:

  1. Run each line by hand and walk it. Look for broken or tilted heads, blocked nozzles and split drip tube.
  2. Note what’s on each line: pop-up sprays, rotary nozzles, drippers or weeper hose.
  3. Don’t mix sprays and drippers on one line. They water at very different rates.
  • The timer hub talks to the tap timers by radio. Holman hubs reach up to about 50 m in the open, less through brick walls, sheds and water tanks. Put it inside, near a window on the side of the house with most taps.
  • The Groundsman Hub runs your watering. It needs a power point and good Wi-Fi, and is usually next to the timer hub or the router.
  • One Holman hub takes 4 timers. A bigger garden needs a second hub.

Start with what suits Adelaide’s climate:

  • Water early. SA Water suggests before 9am or after 6pm, when less is lost to evaporation and wind.
  • Water deeply and less often. Two or three good waterings a week in summer grow deeper roots than a little every day.
  • Split runs on clay. Heavy clay takes water in slowly, so long runs run off. Shorter rounds with a soak between them work better.
  • Let rain count. Skip runs after real rain, and drop watering right back in winter.

A Groundsman kit arrives set up for your home Wi-Fi, with the timers already paired, so you never need another app.

  1. Fit the timers to the taps and put the batteries in.
  2. Plug in the timer hub and the Groundsman Hub.
  3. Open the app on your phone and check every timer with Test timers.
  4. On the Zones tab, add a satellite photo, outline your block and draw your zones.
  5. Set each zone’s type, grass and how it’s watered.
  6. On the Watering tab, press + New program. The wizard suggests days, times and minutes from your zones, soil and the month.
  7. In Settings, turn on rain skips and, if you like, Adjust run times to the weather.

The full steps are in Set up a Groundsman kit yourself.

  • Many taps, or taps far from the house.
  • Sprinkler lines that need repairs or splitting into separate zones.
  • You’d rather have it done for you, including the map and the first programs.

Groundsman · smart watering and lawn care for Adelaide homes ·hello@groundsman.au