How to choose replacement sprinkler nozzles
The safest replacement is the same nozzle again: same make, same pattern, same throw. If you’re upgrading, choose nozzles that fit your existing sprinkler bodies and that put water down at the same rate as the rest of the zone. Mixing fast and slow nozzles on one zone is the most common reason a lawn waters unevenly.
Identify what you have
Section titled “Identify what you have”Unscrew the nozzle (turn the zone off first) and look at the top and sides.
- Make and series: often moulded into the plastic.
- Throw: usually a number. Many makers give it in feet, so a “12” or “15” is roughly a 3.5 or 4.5 m throw.
- Pattern: a letter or a symbol for quarter, half, full circle, adjustable or strip.
- Colour: many makers colour-code the cap or insert by throw or pattern.
Take it to the irrigation shop if you’re unsure. The body it screws onto matters too: rotors take their own maker’s nozzles, while many spray nozzles share a common thread and fit most brands’ pop-up bodies.
Pick the right pattern
Section titled “Pick the right pattern”- Quarter (90°): corners.
- Half (180°): along a straight edge, such as a path or fence.
- Full circle (360°): in the open, away from edges.
- Adjustable (variable arc): odd angles, curved beds.
- Strip (side, end or centre): narrow lawns beside driveways and paths.
Right-sized patterns are the main fix for sprinklers that water the path.
Match the watering rate
Section titled “Match the watering rate”A pop-up spray puts down something like 30 to 40 mm an hour; a rotary nozzle may put down 10 to 15 mm. Put both on one zone and the spray areas get two or three times the water.
- Keep sprays with sprays, rotary nozzles with rotary nozzles and rotors with rotors.
- Within sprays, a matched set from one series puts a quarter, half and full circle at about the same rate.
- If you change one head on a zone to rotary nozzles, plan to change them all.
Why rotary nozzles suit Adelaide
Section titled “Why rotary nozzles suit Adelaide”On heavy clay, fast sprays often run off before the water soaks in. Rotary nozzles put water down slowly, so more of it goes into the soil, and their heavier streams drift less in the wind. Expect to run the zone longer for the same depth of water.
With Groundsman
Section titled “With Groundsman”Groundsman can identify your nozzles and show how a swap changes the zone before you buy anything.
- Turn on Sprinklers in Settings (“List each zone’s sprinkler heads”).
- On the Zones tab, open the zone under Timers and tap Choose by photo. Filter by brand or type (sprays, rotary nozzles, rotors, bubblers, drip and micro), or search for its model, colour or markings. Pick one to see how to tell it apart and its patterns with throw and flow.
- To try another nozzle, tap Change on the zone’s sprinkler line. It keeps the count, the body if the new nozzle fits it, and each head’s place and direction on the map. The flow, watering rate and coverage update straight away.
- Tap Suggest better settings. Groundsman tries other nozzles that fit each head’s body (same kind and brand), then arcs, directions and throws, and shows before and after with what to change on each numbered head.
- Watch for a warning that the zone mixes heads with very different rates. That’s the cue to keep sprays and rotary nozzles on separate zones.
- After fitting new nozzles, run a catch-cup test to measure the real rate. Groundsman uses your measured figure over the makers’ charts.
Related
Section titled “Related”Groundsman · smart watering and lawn care for Adelaide homes ·hello@groundsman.au
