Skip to content

Run history

The run history is a record of what actually happened, not what was scheduled: when each tap opened, how long it stayed open, what started it, and how much water it used.

  • For one zone: on Home, tap History next to the zone’s last run.
  • For everything: on Home, tap All runs on the Recent runs card, or Chart on the Water used card.
  • From an alert: tap History on the alert.

At the top, four totals: Runs, Watering time, Water and Skipped. Then a chart, then each day’s runs.

Each run shows:

  • when it started and how long it ran;
  • what started it: the program’s name, a manual run, or “started outside Groundsman (Smart Life or the tap)”;
  • litres: measured by the timer’s flow meter, or estimated from the run time, the zone’s area and its watering rate (marked with ~).

It also records runs that didn’t go to plan:

  • stopped early;
  • didn’t start (the valve didn’t open);
  • cut short by a restart;
  • skipped, with the reason: rain, wet soil, a treatment hold or a pause.
  1. Use the first list to pick Whole property, All lawns, All garden beds, or one zone.
  2. Use the second list to pick Last 7 days, Last 30 days, Last 90 days or Last 120 days.
  3. Switch the chart between Litres and Minutes.

On the chart, measured bars are solid and estimated bars are striped. Tap Close when you’re done.

  • Runs started from Smart Life or a tap timer’s own button are noticed when Groundsman next checks the timers, so their times are approximate.
  • If a zone looks dry, check here first: were its runs skipped for rain, or stopped early?
  • History is kept for 120 days.

Groundsman · smart watering and lawn care for Adelaide homes ·hello@groundsman.au