How to tell if a tap timer is stuck on
A tap timer is stuck on if water keeps flowing after the run should have finished: sprinklers still going, a pooling bed or a meter that keeps turning. Turn the tap off by hand first, then work out why. The usual causes are flat batteries, grit in the valve or a timer that lost contact before it was told to stop.
Signs a timer is stuck on
Section titled “Signs a timer is stuck on”- Sprinklers or drippers running well past their usual time, or in the middle of the day.
- Puddles, runoff into the gutter or a soggy bed the next morning.
- The water meter moving when nothing should be on.
- A big jump in water use for one zone.
Even a few hours of a stuck timer can put down far more water than a week of normal watering, and in an Adelaide summer a stuck timer overnight can waterlog clay beds and drown roots.
Stop it now
Section titled “Stop it now”- Turn the garden tap off by hand. This always works, whatever the timer is doing.
- Press the timer’s manual button, if it has one, to close the valve.
- Leave the tap off until you’ve found the cause.
Common causes
Section titled “Common causes”- Flat or low batteries. A timer needs power to close its valve. If the batteries die mid-run, some timers can be left open. Replace them every spring, and straight away if a timer reports low battery.
- Grit in the valve. Sand or debris stops the valve seating, so it closes only partly and keeps passing water. Clean the inlet filter, then flush the timer by running it for a minute with the hose taken off its outlet.
- Lost connection. If a Wi-Fi timer can’t hear its hub when it’s told to stop, it relies on its own countdown.
- Someone started it another way. A run started from the maker’s app or the timer’s button won’t follow your normal schedule.
- A worn valve. If the timer drips or weeps when it’s off, the seal may be worn and the timer may need replacing.
With Groundsman
Section titled “With Groundsman”Groundsman sends every timer its run time as its own countdown, so the timer shuts itself off even if the controller stops partway. It also watches for timers that might not have closed.
- If a tap may still be on, you’ll see May not have switched off at the top of the Home tab. Groundsman raises it when a timer didn’t answer when told to switch off, came back on soon after, or has been on over an hour without Groundsman starting it.
- Tap Stop all on Home, or Stop everything on the Test timers page. With the Groundsman cloud, Stop everything also works from My garden when you’re away.
- Check the tap in person. If water is still flowing, turn the tap off by hand.
- Open Test timers to see each timer’s battery and countdown. Replace low batteries.
- Run the zone for 1 minute and watch that it switches off at the end.
- If the timer has a flow meter, Water while switched off means it counted water with the valve shut, which points to a valve that isn’t sealing. That alert also pauses the zone’s scheduled watering until you clear it.
- Once sorted, tap I’ve checked it: clear.
Runs started from Smart Life or the tap’s button are noticed and recorded in History, so you can see if someone started it by hand.
Related
Section titled “Related”Groundsman · smart watering and lawn care for Adelaide homes ·hello@groundsman.au
